« New LED Prototypes Set To Lower Lighting Costs | Main | Petzl Tikka Plus Headlamp - Cryptogon »

LED Bike Light System - Instructables

LED-Bike-Light-System.jpg

The "Instructable" outlining the construction of a do-it-yourself LED Bike Light System may seem a little more complex than the other "homemade" flashlights or lamps featured before but if you feel up to the challenge you can try your hand at the headlight or both the headlight/taillight bike light system.

Assembly Parts:
For headlight: Wire 18 Leds (white 25000mcd) Small Breadboard Reflector w/ bracket 9v snap connector Switch
For taillight: Old Bay Tin Switch PNP Transistor (3906) NPN Transistor (2222) 555 Timer 150k resistor 4.7k resistor 1uF Capacitor 160 Capacitor 220 Capacitor Breadboard LEDs Wire 2 x molex KK connectors

Source: Instructables

Posted by Flash Torch Admin on January 22, 2007 1:41 AM |

Post a comment

(If you haven't left a comment here before, you may need to be approved by the site owner before your comment will appear. Until then, it won't appear on the entry. Thanks for waiting.)